This is the Castle Creations "Car" Field Link Programmer. The CarField Link is compatible with all Sidewinder Micro, Sidewinder 1/10,Mamba Max*, Mamba Max Pro, and Monstercontrollers.

Sometimes you need to make a change in the programming of a Castlecontroller and you just don't happen to have a laptop in your man purse.What to do? There's always the old stick programming method that we alllove to hate. Yes it works, but...there has to be a better way. Nowthere is Field Link! Field Link allows you to modify the most commonlyused settings in your Castle controller all at the touch of a singlebutton. No computer needed (mostly). Simply connect the Field Link tothe throttle lead of the controller and power the pair as describedbelow. Click the button to scroll through and change the indicatedsettings. It doesn't get any easier! This card is also a Castle Linkthat allows access to the entire world of Castle tuning functionality.

Does it work without a computer or not?
Yes,mostly. The card is programmed to work with the latest controllers andsoftware when it leaves the Castle workshop. It will work with allCastle Link compatible controllers running software released since 2007.Go to www.castlecreations.com for more details. There is always achance that Castle will upgrade the controller firmware down the roadand that upgrade may require that the Field Link be upgraded too. Thatis easily accomplished, but it will require a computer running thelatest version of Castle Link that is always available for free on theCastle website. Castle will also be happy to upgrade it for you if yousend it to them in the mail.

Note: Field LinkCard is capable of changing the following settings, however, the cardcannot change settings on controller series that do not have thesesettings.

• Cutoff voltage
• Auto LiPo cutoff volts per cell (3.0, 3.1, 3.2, 3.4, 3.5)
• Drag brake
• Brake strength
• Punch control
• Reverse type
• Motor type
• Motor timing and CHEAT mode
  

Specifications:
Length: 3.5" (89mm)
Width: 2.25" (57mm)
Height: .1875" (5mm)

* Mamba Max only connects using the throttle cable. You must upgrade the Mamba Maxto software version 1.23 or higher with your Windows PC to enablethrottle cable USB connectivity.