Whoever said you can't take it with you? Our new X1 AC Plus battery charger goes everywhere you go. Capable of charging all battery types, this charger is the affordable and portable answer to keeping your batteries charged and ready for action. The 50-watt X1 AC Plus will charge all your batteries at rates from 0.1 to 6 amps, using either 11-18V DC or 100-240V AC power sources. Designed to charge NiMH, NiCd, LiPo, LiFe, Li-Ion and Lead-based batteries, the X1 AC Plus is the perfect charging solution for your RC hobby. Drivers and pilots alike will appreciate its price and relish in its dependability.

Part No: 44165

To Download the Hitec X1 AC Plus Manual Click Here

Charging Specifications:

SPECIAL FEATURES

Optimized Operating Software
The X1 features the so-called AUTO function that sets the feeding current during the charging or discharging process. This can prevent overcharging which may lead to an explosion due to the user's error, especially when charging Lithium batteries. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication to achieve the maximum safety and minimize the problems. All the settings can be configured by users!

Internal Independent Lithium Battery Balancer
The X1 employs an individual cell voltage balancer. It isn't necessary to connect an external balancer for balance charging.

Balancing Individual Cells Battery Discharging
During the process of discharging, the X1 can monitor and balance each cell of the battery individually. If the voltage of any single one cell is abnormal, an error message will be indicated and the process will be ended automatically.

Adaptable To Various Types Of Lithium Batteries
The X1 is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.

Fast and Storage Mode Of Lithium Batteries
The technique for charging Lithium batteries varies. "Fast" charge reduces the duration of charging. The "Store" state can control the final voltage of your battery giving the ability to store for a long time and protect the useful life of the battery.

Maximum Safety
Delta-peak sensitivity is the automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.

Automatic Charging Current Limit
You can set up the upper limit of the charging current when charging your NiCd or NiMH battery; it is useful for the NiMH battery of low impedance and capacity to be in the 'AUTO' charging mode.

Capacity Limit
The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value.

Temperature Threshold*
The battery's internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated.
* This function is available by connecting an optional temperature probe, which is not included in our package.

Processing Time Limit
You can also limit the maximum process time to avoid any possible defects.

Input Power Monitoring
The voltage of the car battery that is being used as the DC input power is monitored in order to protect the battery from becoming damaged. If it drops below the lower limit, the process will be ended automatically.

Data Store/Load
The maximum five batteries' data can be stored for the user's convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out data at any time without any special program setting.

Cyclic Charging/Discharging
1 to 5 cyclic and continuous processes of charge>discharge or discharge>charge are operable for battery refreshing and balancing to stimulate the battery's activity.